Product Image
Thumbnail

Alex Strabala HX Stomp A30+A15 Stereo Amps

$7.99

A30 + A15 in parallel with my signature 15ms simple delay which massively increases the stereo image. This preset is designed to integrate into your existing pedalboard as a direct solution with a couple extra effects if you want to use them. It will work well at the end of your pedalboard as a clean amp + a couple extra effects, or between your wet and dry effects, enabling you to effectively use the “amp drive” switch (footswitch 1).


Marketplace Vendor: Alex Strabala
Marketplace Compatibility:
  • HX Stomp
Asset Type:
  • Preset

A30 + A15 in parallel with my signature 15ms simple delay which massively increases the stereo image.

This preset is designed to integrate into your existing pedalboard as a direct solution with a couple extra effects if you want to use them. It will work well at the end of your pedalboard as a clean amp + a couple extra effects, or between your wet and dry effects, enabling you to effectively use the “amp drive” switch (footswitch 1).

Footswitches:

  1. Amp drive up/down: go from edge of breakup to cranked. Place your wet effects in Stomp’s loop after the amp/cab/eq blocks (or after the Stomp altogether), and use this footswitch to eliminate the need for expensive transparent overdrives.

  2. Toggles the decay and mix on the reverb block.

  3. Single coil / humbucker switch. LED off = single coil, LED on = humbuckers. Toggles some amp settings to maximize flexibility with different guitars and pickup configurations. In order to access this switch you will need to go to the global settings and set FS3 Function to “Stomp 3.”

  4. Clean Boost (use a two button TRS footswitch to gain access to fs4 and fs5 on Stomp).

Important note for users running mono: Bypass or delete the delay on path 1B in order to avoid phase cancellation when the two stereo amps are summed to mono.