Product Image
Thumbnail

KP FatDR - Biamp

$4.99

Bi-amped Fat Drive . Keeps LOWs steady with 2 stage adjustable Overdrive via GAIN Block. OD Gain is adjustable by user. Added Octave and separate Side Jack SEND minus Amp and Cab sims. MAIN OUT has it all


Marketplace Vendor: Kirk Powers
Marketplace Compatibility:
  • HX Stomp
Asset Type:
  • Preset

Thank you for coming to my Line6 shop.

Most of my presets are set for use with my passive Fender P Basses and J basses.

I was on a session and noticed the engineer Bi-amping my track while mixing my bass track. He did this by splitting High and Lows then recombining them. So I wanted to try that in an HX STOMP Preset.

I almost always add an Octaver to my presets, so it's set at the top of the chain and will route to separate SEND Block to the HX STOMP'S SEND side jack minus the amp sim blocks. 

* The SIDE SEND jack will only have the OCATVER Block and your clean unprocessed Bass sound. Set at +6dB. If that is too hot for your amps input you can lower the gain in the SEND block witout affecting your preset Gain Structure.

 * The entire preset i.e. Octaver (when engaged), Overdrive (when engaged), preamps, cabs, compressor, etc., will feed your MAIN OUT jack.

 * I added a seperate GAIN Block Post SEND block, but PRE signal Chain just in case you have to GAIN UP or GAIN DOWN your signal to meet your desired amount of Overdrive.

 * Footswitch #1 PURPLE is Octave > OFF / ENGAGE

 * Footswitch #2 RED is Overdrive >OFF/ ENGAGE

Thank you kindly. I hope you enjoy this one.

Kirk Powers
www.kirkpowers.com