Valid product registration or software purchase required to use CustomTone.

TONE NAME: CLASSIC ROCK 1

  • Created with: Helix
  • Author:
  • Style:
    Classic Rock (Twin / Plexi Snapshots)
  • Date: 7/21/18
  • Downloads: 1276
  • Addons:

    Model Packs increase the number of Amp or FX Models of a GuitarPort, TonePort, PODxt, PODxt Live or PODxt Pro, for a wider variety of tone possibilities. When a particular tone in the library relies on a Model available in one of these packs, you'll see symbol(s) to indicate which Packs: MS (Metal Shop), CC (Classics Collection), FX (FX Junkie), and PP (Power Pack).

    The models within the FX Junkie Model Pack are already included in PODxt Live, and offered for purchase to add-on to GuitarPort, TonePort, PODxt and PODxt Pro.

    Variax is the uniquely flexibile guitar from Line 6. Our Vetta II amplifier includes a digital connection for the Variax that lets you store settings for both your amp and your guitar in the Vetta II so that when you call up a Vetta Channel Memory your amp and guitar can change sounds together. Vetta II Tones marked with this guitar symbol include this Variax data.

    For each tone in the library, you'll see an icon for either a single coil or humbucker pickup. This tells you whether the tone is best for use with a single coil pickup or a humbucker, so you can select the appropriate pickup on your guitar when using this tone.

    Attention POD 2.0, Flextone and HD147 owners... Your hardware doesn't do Stomp effects, so you'll hear something different than what was intended. Try increasing the Drive or choose a higher gain Amp Model to get the right sound. The other aspects of the sound should translate as expected, so you'll at least get a great starting place for tweaking.

  • Comments:
    1st in a series of Classic Rock, Amp-based presets for gigging. This one is based on a Fender Twin (US Dbl Nrm) and a Marshall Plexi (Brit Plexi Brt). 4 snap/4 stomp mode with Snapshots on bottom row. Snapshots are 1. Clean; 2. Crunch; 3. Drive; 4. Lead (more drive and delay) in this one the first two snaps are based on the Twin and the last two snaps are based on the Plexi. both amps make use of a EP Boost (Kinky boost); a Timmy (Teemah); and a Klon (Minotaur). Also available are Trem, Chorus and a Gain boost on the top row. A Wah and Volume pedal (post-amp so the drive isn't decreased when lowering volume) are also included. Finally, like all my recent presets, this is a "Split-Output" preset. The 1/4" output has NO CAB or IR included. It's for use with a power-amp and real guitar cab (or for 4CM), and the XLR outs have a parallel path with an IR and a EQ Block. The IR I used when building this is a M Britt 212 Cab (MB 3P B 212 10). The XLR out is set to NOT be controlled by the "big volume" knob - so the FOH guy can control your feed to the PA. But you have control over the Non-IR/Cab 1/4" out for stage volume. You can change your settings in the global settings or change the output blocks if you only wish to use one or the other on both outputs. I did a VERY rough, quick video of this preset using different guitars, here; https://www.youtube.com/watch?v=Tzc00RAlfjw This was done a LIVING ROOM Volumes, and recorded direct with a Zoom Q2N camera. No post-processing at all. Everything you hear is the preset only (through BOTH a 1X12 Open back cab and a QSC K8 PA speaker).

Tone successfully deleted

 
Delete this tone forever?

Yes / No
There was a problem deleting the tone.

Close

Tones contributed by users to the Public Tone Exchange are made by individual users, who are in no way affiliated with Line 6. Any product name or trademarks used by the users to describe their Tones are the sole property of their respective owners. Any use of these product names or trademarks of other manufacturers should not be construed as an endorsement, association or affiliation with Line 6.